project armoire

Restoration Hardware St. James Armoire $2395

When you live in a small space like me, you must go "up" when it comes to storage.  I needed a large armoire and I wish I could afford a piece from  Restoration Hardware.  Recently much of their furniture features a beautiful driftwood-style patina--really light, aged and distressed wood.  I'm really attracted to their pieces because the finishes feel bare, simple and rustic.  Not fussy or glamorous, yet are still chic. 

Pictured here is the St. James armoire from Restoration Hardware in an antiqued natural finish.  My project was to try to achieve a similar finish with a slightly more grey undertone and to do this, I would have to attempt several techniques that I've never tried before, including, bleaching wood and color washing.

Armoire before any treatment

I found this large 6 foot armoire for $60.  It had spent the last few years on the previous owner's covered porch so luckily for me it had naturally aged.  Most of the poly finish on the surface was gone.  I started with a thorough sanding with high grit sand paper (60), and then did a bleaching process.  Using straight undiluted clorox bleach, I applied the bleach with pop-up sponges I had from Trader Joes.  I made sure to wear gloves, but still ended up getting burned by the bleach.  Be careful!  The problem with applying the bleach using sponges and working on a vertical surface, is that it's messy and it dripped everywhere, especially down my arms puddling at the edge of my glove.  I applied two coats (drying in between) of bleach, then decided to spray the bleach instead of using sponges because my arm was burning. I filled an old spray bottle from Bath and Body Works, filled with bleach and sprayed it on.  This worked well because the spray bottle created a nice, even mist of bleach that I didn't have to rub in.

after bleaching

Bleach burn-actually much worse than it looks here

After color wash and wood wax

There are other ways to bleach wood: (1)oxalic acid, (2) two part   hydrogen peroxide and sodium peroxide applied separately, and (3) lemon juice.  I decided to go with bleach because I already had it on hand.  The next day I noticed I had accidentally left a sponge in the bleach bucket and it was completely disintegrated.  Potent stuff!  The next step was to apply a charcoal-grey wash.  I diluted acrylic paint I already had from an art store (Daler Rowney acrylic DR120 $5.50), with water (about 20:1 ratio), and applied two coats (drying in between) using those same Trader Joe's sponges (they come in a big pack!).  You can also apply color washes using two rags, one to apply, then the other to wipe off.  I thought the sponges worked really well, the only obvious problem is that it is messy and I got it all over myself.

(The shots above were taken after the paint-wash)  The color wash worked its way into the grain which I really liked.  Although I was starting to get the color I was after, the finish looked really dull and dry.  I sanded with 60 grit and then 150 grit paper, and rubbed on wood finishing wax paste (Minwax).  At this point I thought I was done.  The next morning, however, I thought it was too grey and the wax brought out a little redness in the wood.  So using 60 grit sandpaper, I sanded and sanded and sanded.  Essentially I was sanding out the wax which took a lot of muscle (I cannot wait to buy an electric sander).  I went over that with 150 grit, and finally finished with several coats (1 spray can) of satin polyurethane.  For the finishes that I like, lots of sanding seems to fix any problems.  I finished the piece with "Hard Candy" clear glass knobs from Anthropologie ($2.95 each on sale).  (finished armoire below)

Lastly, I reconfigured the shelving and hanging bar  inside the unit to maximize space.  I moved the hanging bar lower, and installed two upper shelves.  For one of the shelves, I used scraps to add a divider and a smaller half-shelf above that.  I did not create all the narrow shelving on the right!  That was already in place.  I had 3/4 inch pine cut at my local hardware store, and used an electric drill for the shelf holders.  To keep the “T” of the divider in place, I drilled in both pieces and used an some extra wood pegs from an IKEA piece I was no longer using to secure them in place.  Another project down the road will be to do something creative on the surface side doors and possibly the surface of the shelving as well.  Extra benefit: now that my clothing is organized and everything has a place, I think twice about any purchases.  If something comes in I know something else has to come out.   

Overall this was a fun project and I completed it over the course of a couple weeks.  Compared to the Restoration Hardware piece, I figure I saved myself close to $2300. 

project shabby chic dresser

My first decorating style was Rachel Ashwell's iconic "shabby chic" (founded in the early 90s).  This is the style that inspired me to start painting furniture and intensified my love for antiques and vintage pieces.  I thought it was brilliant the way she brought together British cottage and California chic.  The neutral pallet of creams, whites and pinks, slipcovers, and distressed finishes made for easy non-formal living.  I think it continues to attract a lot of people because it's an easy look to achieve, has lovely romantic, charming vibe, and is very comfortable.

After the stress of my qualifying exams, I refinished an entire bedroom including this dresser, a bed, vanity and stand up mirror, as well as a kitchen island.  Yes, I needed to decompress.  Pictured here is the dresser. Unfortunately I do not have any "before" pictures (if I can find pictures of the other pieces I will post them!).

I bought this dresser unfinished ($100) because I liked the lines and it had a lot of nice molding around the drawers.  I took the mirror off for painting and meticulously taped it out.  There were lots of curves so this took a while.  I removed all the drawers to work on separately.  Before painting I epoxy-glued 1 inch rope trim and various appliques, purchased at a wood-working store.  This particular store was going out of business so I just bought what I could without knowing exactly where everything would go.

Although difficult to see in these pictures, I added the rope trim to the right and left perimeter face.  The appliques were added to the mirror, and bottom and top large drawers.  I didn't prime, but instead painted two coats of antique white (from OSH) in a satin finish. Using 150 grit sand paper I sanded along the edges to give the piece a light distressed look.  I was pretty happy with the paint job so I didn't want to over do the distressing.  After wiping off the sawdust, I finished with wax (Minwax paste finishing wax) and rubbed this into the wood using a rag.  I like finishing with a wax because it seals the surface, gives a light luster-sheen, and the finish feels soft.  I completed the look with 1 1/4 inch pink glass knobs that I ordered online    from lookintheattic.com ($2.29 ea).  One final note--some of the drawers were sticky so I rubbed a beeswax candle on the bottom and top edges and they glided with ease.